Angebote zu "Systems" (58 Treffer)

Formal Systems Specification
107,00 € *
ggf. zzgl. Versand

The RPC-memory specification problem was proposed by Broy and Lamport as a case study in the formal design of distributed and concurrent systems. As a realistic example typical for operating systems and hardware design, the RPC-memory problem was used as the basis for comparing various approaches to formal specification, refinement, and verification. Preliminary solutions were discussed during a workshop at Schloss Dagstuhl, Germany, in September 1994. Then an extensive discussion took place between the referees and authors. Finally 15 thoroughly revised papers were accepted for inclusion in this volume in full detail together with the problem statement and a synopsis.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
Hybrid Systems: Computation and Control
101,60 € *
ggf. zzgl. Versand

This volume contains the proceedings of the Third International Workshop on Hybrid Systems: Computation and Control (HSCC 2000), which was held on March 23-25, 2000, in Pittsburgh, Pennsylvania. The proceedings of the rst two workshops in this series were published by Springer-Verlag, in the Lecture Notes in Computer Science series, as volumes 1386 and 1569. The focus of the Hybrid Systems workshop series is on modeling, control, synthesis, design, and veri cation of hybrid systems. A hybrid system is a th- reticalmodelforacomputercontrolledengineeringsystem,withadynamicsthat evolvesbothinadiscretestatesetandinafamilyofcontinuousstatespaces.- brid systems researchis motivated by, for example, controlof electro-mechanical systems(robots),air tra ccontrol,controlofautomatedfreeways,andchemical process control. The research area of hybrid systems overlaps both with c- puter science and with control theory. The workshop series is intended to foster the interaction between researchers from these elds in addressing problems in this new domain. The scientic program of the workshop consisted of four invited talks and 32 contributed talks. The following researcherspresented invited talks: K. Butts (Ford Research, USA), N. Leveson (MIT, USA), A. Sangiovanni-Vincentelli (U. California,Berkeley,USA), and B. Williams (MIT, USA). The contributed talks were based on the papers in these proceedings. The program committee, chaired by the editors, selected the 32 contributed papers out of 71 submitted papers. The editors are grateful to the members of theprogramcommitteefortheir generoushelpinthereviewingandtheselection process.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
Hybrid Systems: Computation and Control
74,90 € *
ggf. zzgl. Versand

This volume contains the proceedings of the Second International Workshop on Hybrid Systems: Computation and Control (HSCC99) to be held March 29- 31, 1999, in the village Berg en Dal near Nijmegen, The Netherlands. The rst workshop of this series was held in April 1998 at the University of California at Berkeley. The series follows meetings that were initiated by Anil Nerode at Cornell University. The proceedings of those meetings were published in the Springer-Verlag LNCS Series, Volumes 736, 999, 1066, 1201, and 1273. The p- ceedings of the rst workshop of the new series was published in LNCS 1386. The focus of the workshop is on modeling, control, synthesis, design, and ve- cation of hybrid systems. A hybrid system is a theoretical model for a computer controlled engineering system, with a dynamics that evolves both in a discrete state set and in a family of continuous state spaces. Research is motivated by, for example, control of electro-mechanical systems (robots), air tra c control, control of automated freeways, and chemical process control. The emerging - search area of hybrid systems overlaps both with computer science and with control theory. The interaction between researchers from these elds is expected to be fruitfull for the development of the area of hybrid systems.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
Methoden und Techniken der Systementwicklung
44,80 € *
ggf. zzgl. Versand

Auch bei kleinen und kleinsten Vorhaben wird heute ein methodisches Vorgehen verlangt. Die Zwischen- und Endresultate sollen übersichtlich und nachvollziehbar dargestellt werden. Dabei sind diejenigen gut beraten, die über ein breites und ausgewogenes Repertoire an Methoden und Techniken verfügen. Der Problemlösungszyklus, wie er aus dem Systems Engineering bekannt ist, bietet das grundlegende Vorgehen für die Lösung einfacher und komplexer Probleme. Er stellt ein einfaches, aber wirksames Instrument dar. Dessen Prinzipien und Phasen können allerdings nur umgesetzt werden, wenn konkrete Verfahren und Techniken bereitstehen. Was nützen uns beispielsweise chemische Formeln über Supraleiter, wenn die Herstellungsverfahren nicht bekannt sind? Genau so verhält es sich auch beim modernen Engineering: Probleme lassen sich nur mit zweckmässigen Techniken lösen, die kompetente Fachkräfte anwenden können. Dieser Leitfaden hilft bei der Beurteilung und beim Einsatz der verschiedenen Verfahren. Er ist als Ergänzung und Fortsetzung zu System-Entwicklung in der Wirtschaftsinformatik konzipiert.

Anbieter: ciando eBooks
Stand: 23.06.2015
Zum Angebot
Specification and Development of Interactive Sy...
102,00 € *
ggf. zzgl. Versand

This book presents a fundamental mathematical and logical approach to soft­ ware and systems engineering. Considering the large number of books de­ scribing mathematical approaches to program development, it is important to explain what we consider to be the specific contribution of our book, to identify our goals, and to characterize our intended target audience. Most books dealing with the mathematics and logics of programming and system development are mainly devoted to programming in the small. This is in contrast to our book where the emphasis is on modular system development with the help of component specifications with precisely identified interfaces and refinement concepts. Our book aims at systems development carried out in a systematic way, based on a clear mathematical theory. We do not claim that this book presents a full-blown engineering method. In fact, this is certainly not a book for the application-driven software engi­ neer looking for a practical method for system development in an industrial context. It is much rather a book for the computer scientist and the scientifi­ cally interested engineer who looks for basic principles of system development and, moreover, its mathematical foundations. It is also a book for method builders interested in a proper mathematical foundation on which they can build a practical development method and industrial-strength support tools.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
Geschäftsprozessorientierte Systementwicklung -...
46,99 € *
ggf. zzgl. Versand

Dieses Herausgeberwerk gibt einen fundierten Einblick in die Grundlagen, Erfahrungen und Anwendung der Methodik des Semantischen Objektmodells (SOM) zur geschäftsprozessorientierten Systementwicklung. Die SOM-Methodik ist einer der führenden integrierten Enterprise Modeling-Ansätze. Die Beitragsautoren führen in die Grundlagen der Unternehmensmodellierung und der SOM-Methodik ein. In darauf aufbauenden Beiträgen werden die Unterstützung von Managementprozessen sowie die Systementwicklung betrachtet. Besonderes Augenmerk liegt dabei v. a. auf modellgetriebenen Ansätzen sowie den Themen Wiederverwendung und Weiterentwicklung. Anhand von Praxisbeispielen wird dem Leser ein anschaulicher Zugang zum Thema ermöglicht. Thomas Benker arbeitet als wissenschaftlicher Mitarbeiter am Lehrstuhl für Wirtschaftsinformatik, insbes. Systementwicklung und Datenbankanwendung der Universität Bamberg. Seine Schwerpunkte in Forschung und Lehre liegen auf den Themen modellgetriebene Softwareentwicklung sowie geschäftsprozessorientierte Anwendungs- und Data Warehouse-Systeme. Carsten Jürck arbeitet als Data Warehouse-Architekt und Berater beim IT-Spezialist CEUS. Seine Arbeitsschwerpunkte liegen auf der Konzeption, Entwicklung und Betriebsplanung von Data Warehouse-Produktlinien. Daneben forscht er in den Themenbereichen Modellierung und Gestaltung von BI-Systemen und der modellgetriebenen Systementwicklung. Dr. Matthias Wolf ist als Berater und Coach beim IT-Spezialist CEUS tätig. Seine Arbeitsschwerpunkte liegen auf der Konzeption und Entwicklung von Data Warehouse-Architekturen. Daneben forscht und lehrt er in den Themenbereichen Modellierung und Gestaltung von Prozessen, modellbasierte Systementwicklung und Datenbankdesign.

Anbieter: ciando eBooks
Stand: 07.02.2017
Zum Angebot
Kunz, Jürgen: Vererbung für Systementwickler
54,99 € *
ggf. zzgl. Versand

Grundlagen und Anwendungen. 1995. Auflage

Anbieter: eBook.de
Stand: 18.12.2016
Zum Angebot
Petri Nets for Systems Engineering
128,40 € *
ggf. zzgl. Versand

Formal methods for the specification and verification of hardware and software systems are becoming more and more important as systems increase in size and complexity. The aim of the book is to illustrate progress in formal methods, based on Petri net formalisms. It contains a collection of examples arising from different fields, such as flexible manufacturing, telecommunication and workflow management systems. The book covers the main phases in the life cycle of design and implementation of a system, i.e., specification, model checking techniques for verification, analysis of properties, code generation, and execution of models. These techniques and their tool support are discussed in detail including practical issues. Amongst others, fundamental concepts such as composition, abstraction, and reusability of models, model verification, and verification of properties are systematically introduced.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
System Configuration Management
74,90 € *
ggf. zzgl. Versand

This book constitutes the refereed proceedings of the 8th International Symposium on System Configuration Management, SCM-8, held in conjunction with ECOOP´98 in Brussels, Belgium, in July 1998. The volume presents 17 revised full papers carefully reviewed and selected for presentation; also included is a tutorial lecture; approximately half of the papers come from industry. The book is divided into sections on industrial experience, experimental systems, product data management and system configuration management, formal approaches, cooperative systems, and Web-based applications.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot
Object-Oriented Analysis and Design: With the U...
252,00 € *
ggf. zzgl. Versand

A growing segment of the market have begun teaching Systems Analysis and Design using an object-oriented approach. This new approach has been widely recognized as the future of the analysis and design market by students and instructors. Building on the well renowned Systems Analysis and Design in a Changing World, Third Edition by John Satzinger, Robert Jackson and Stephen Burd, the authors have recreated this object-oriented text for anyone looking for this new approach. All texts are accompanied by a free 120-day trial version of Microsoft Project 2003 to give students a hands-on experience with this new software.

Anbieter: buch.de
Stand: 07.05.2017
Zum Angebot